Main Monitor VL-MWD275

RM 1,825.00

Quantity

- +

Model composition	Main Monitor(VL-MWD275) x1, Door Station(VL-V524L) x1, Wireless monitor(VL-WD619) x 1
Maximum Connectable Units	Door Station Up to 2 (1 included with VL-SWD275)
Monitor	Up to 3 extension monitors (not including the main monitor)
Wireless Monitor	Up to 6 (1 included with VL-SWD275)
Wireless Repeater	Up to 2 (sold separately)
Connectable Devices	E-lock Release Support Up to 2 (user supplied)
PBX	Only Panasonic PBX
Convenience Picture Recording Internal memory	Up to 50 visitors/sessions (up to 4 still images per visitor/session)
Night Vision	Yes (LED lights)
Voice Changer	Yes (One-touch)

Intercom call	Yes (between main monitor, wireless sub monitor and extension monitor)
Monitor	Power source 220-240 V AC, 50/60 Hz
Power consumption	Standby: 2.9 W , Operating: 13.7 W Measurement conditions: door station VL-V524 (1 pc.) is connected to the main monitor and wireless monitor VL-WD619 (1 pc.) is linked to the main monitor.
Dimensions (H x W x D)	Approx. 158 x 201 x 25 mm
Mass (weight)	760 g (Including AC cable)
Operating environment Ambient temperature	Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 %
Display size	7-inch wide colour / WVGA (800 x 480 pixels) (Touch sensor keys)
Talking method	Hands-free
Frequency range	1.88 GHz to 1.90 GHz
Installation method	Wall mount (mounting bracket supplied)

External material	Flame retardant ABS resin
Door Station	Power source Power supplied by the main monitor
Dimensions (H x W x D)	Approx. 152 x 102 x 35.5 (21.5 ) mm Excluding sections embedded into the wall.
Mass (weight)	Approx. 225 g
Operating environment Ambient temperature	Approx. -15 ℃ to +55 ℃, Relative humidity (non-condensing): up to 90 %
Talking method	Hands-free
Viewing angle	Horizontally: Approx. 85°, Vertically: Approx. 54°
Image sensor/ Camera (pixel)	1/3 inch CMOS sensor (Approx. 1.3 M pixels)
Minimum illuminance required	1 lx (within approx. 50 cm from the camera lens)
Lighting method	LED lights

IP rating (INGRESS PROTECTION)	IP44
Installation method	Surface mount (mounting base supplied), Flush mount (mount box sold separately)
External material	Flame retardant ABS resin
Wireless Monitor Power source Main body	Rechargeable battery AAA (R03)
Battery	Ni-MH battery (1.2 V, 550 mAh)x2
Dimensions (H x W x D)	Approx. 173 x 52 x 30 mm (excluding protruding sections)
Mass (weight)	Approx.160 g (including the batteries)
Operating environment Ambient temperature	Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 %
Display size	2.2-inch colour / QVGA (320 x 240 pixels)
Frequency range	1.88 GHz to 1.90 GHz

RF transmission power	Approx. 10 mW (average powerper channel) 250 mW (max.)
Operating time Standby use	approx. 80 hours*When used fully charged in an operating temperature of 20 °C.
Charging time	Approx. 8 hours*When the operating temperature is 20 °C. The charging time may increase when the operating temperature is lower than this.
Transmitting range	Approx. 100 m (line-of-sight distance between the main and wireless monitor)
External material	ABS resin
Charger Power source	AC adaptor (5.5 V DC, 0.5 A)
Power consumption Standby	0.6 W * , Charing: 1.6 W*When the sub monitor with full-charged batteries is placed on the charger.
Dimensions (H x W x D)	Approx. 43 x 81 x 76 mm (excluding protruding sections)
Mass (weight)	Approx. 70 g (excluding the AC adaptor)
Operating environment Ambient temperature	Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 %

External material

ABS resin